PC Engine Composite Adapter

A simple design for a composite adapter for the PC Engine (the one in the photo is an older version, without the logo, and the cylinders were too thin). In addition to this I used an old scart to composite adapter with the scart side desoldered (the markings on the bottom are in the proper place for the little circuit board on mine, they may or may not be right for yours. If they don't fit just use a hobby knife to remove them), some wire, and five female wire to pin connectors (the ones I got were called 2.54mm dupont jumper wire connectors).
Attach the connectors to the wires, and insert them into the proper holes (if you're directly facing the pc engine side of the adapter that's all the holes on the right, and hole two and three on the left).
Once that is done you can solder the wires to their proper places on the composite side:

Audio R= Top row, first pin from the right.
Audio L=Bottom row, first pin from the right.
Audio Ground= Top row, second pin from the right.
Video