Persona 5 - HueForge

by Garder3D · Hueforge & Lithophane

74 Downloads

37 Likes

39 Makes

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 180.01x132.61mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA i3D Tested Black Transmission Distance: 0.6 PLA i3D-Tested Red Transmission Distance: 5.5 PLA Sakata 3D Light Gray Transmission Distance: 1.4 PLA i3D Tested White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Red At layer #13 (1.12mm) swap to Light Gray At layer #18 (1.52mm) swap to White for the rest.