Thingiverse
PiKVM Case
von motey1
35
Downloads
35
Likes
1
Makes
Case for a [PiKVM](https://pikvm.org/) with following equipment:
* Raspberry Pi 4
* HDMI to CSI-2 bridge based on TC358743 https://de.aliexpress.com/item/4000102166176.html
* USB-C/PWR Splitter https://www.tindie.com/products/8086net/usb-cpwr-splitter/
* OLED 0.91 in 128x32 https://de.aliexpress.com/item/4001028654247.html
Also you need 2x M3x35mm Screws with a flat or cylinder head like these https://de.aliexpress.com/item/1923185367.html
* Raspberry Pi 4
* HDMI to CSI-2 bridge based on TC358743 https://de.aliexpress.com/item/4000102166176.html
* USB-C/PWR Splitter https://www.tindie.com/products/8086net/usb-cpwr-splitter/
* OLED 0.91 in 128x32 https://de.aliexpress.com/item/4001028654247.html
Also you need 2x M3x35mm Screws with a flat or cylinder head like these https://de.aliexpress.com/item/1923185367.html
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
