MakerWorld
Hueforge & Lithophane
Zum Modell
Playstation Logo Hueforge
4
Downloads
4
Likes
1
Makes
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x112.5mm in size You may print at higher layer heights below the Base Thickness of 0.72mm The Max allowed Thickness is 3.52mm and the Actual Thickness is 3.36mm #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #00358e PLA BambuLab Basic Blue Transmission Distance: 4 #00b1b7 PLA BambuLab Basic Turquoise Transmission Distance: 1.4 #fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Blue At layer #16 (1.36mm) swap to Turquoise At layer #19 (1.6mm) swap to Sunflower Yellow At layer #26 (2.16mm) swap to Red At layer #35 (2.88mm) swap to Jade White for the rest.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
