Thingiverse
Print head for Hypercube Evolution
door madlex
13
Downloads
11
Likes
0
Makes
About
***
This is a hotend cover I designed for Hypercube Evolution to mount all the print head ventilators onto it. It connects to the "Extruder Mount" via two screws and it will replace your usual extruder clamp. It uses two side turbo fans for part cooling and one 40 mm fan for cooling the coldend.
The opening behing hotend, previously used in the original design to connect the 50mm turbo fan, can be repurposed as channel to route the hotend wires through it.
Check out this presentation video: https://www.instagram.com/p/CBQ-lsZloO0/
Follow
***
I also post pics and videos of my designs on my [Instagram](https://www.instagram.com/madxfpv)
Extra
***
On the top it has four 5 x 5 mm holes to insert neodium magnets for attaching a cap (that I haven't designed yet). You can also use this holes for brass inserts, to connect other things.
On the sides, each vent has four 5 x 5 mm holes for brass inserts, with the same purpose.
I also attached a strip of neopixels to
***
This is a hotend cover I designed for Hypercube Evolution to mount all the print head ventilators onto it. It connects to the "Extruder Mount" via two screws and it will replace your usual extruder clamp. It uses two side turbo fans for part cooling and one 40 mm fan for cooling the coldend.
The opening behing hotend, previously used in the original design to connect the 50mm turbo fan, can be repurposed as channel to route the hotend wires through it.
Check out this presentation video: https://www.instagram.com/p/CBQ-lsZloO0/
Follow
***
I also post pics and videos of my designs on my [Instagram](https://www.instagram.com/madxfpv)
Extra
***
On the top it has four 5 x 5 mm holes to insert neodium magnets for attaching a cap (that I haven't designed yet). You can also use this holes for brass inserts, to connect other things.
On the sides, each vent has four 5 x 5 mm holes for brass inserts, with the same purpose.
I also attached a strip of neopixels to
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
