Thingiverse
Printer Warning Sign - Do Not Touch
door tonkugel
2.1k
Downloads
1.8k
Likes
5
Makes
A sticker was my inspiration to design this funny warning sign for my 3D Printer.
Change filament color from black to white after printing to the layer height of 1mm to make the embossed areas visible.
### Which one should I print?
I recommend the *INVERTED* files as the texts are embossed. This way it requires less material and time to print.
If your printer doesn't handle fine structures well (e.g. stringing is a problem), try the *enhanced* files. Here the texts are debossed. On some printers this may produce better results but on some printers worse.
The most flat design are the normal ones where the WARNING area is not raised. Here a third swap to red filament is not possible with single extrusion.
Also for each design there exists one design for normal (cartesian) printers or for delta printers. Those designs are available in both, English and German.
### How to print colors:
If you don't want to paint the print, you can print the sign in three steps by ch
Change filament color from black to white after printing to the layer height of 1mm to make the embossed areas visible.
### Which one should I print?
I recommend the *INVERTED* files as the texts are embossed. This way it requires less material and time to print.
If your printer doesn't handle fine structures well (e.g. stringing is a problem), try the *enhanced* files. Here the texts are debossed. On some printers this may produce better results but on some printers worse.
The most flat design are the normal ones where the WARNING area is not raised. Here a third swap to red filament is not possible with single extrusion.
Also for each design there exists one design for normal (cartesian) printers or for delta printers. Those designs are available in both, English and German.
### How to print colors:
If you don't want to paint the print, you can print the sign in three steps by ch
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
![[remix] Printer Warning Sign - Do Not Touch - elevated](/imgproxy.php?url=https%3A%2F%2Fcdn.thingiverse.com%2Fassets%2F05%2Ff3%2F30%2F92%2Fc6%2Flarge_display_WarningSignPrinter_elevated2.png&w=400&h=300)
