Project Babble - "Raspberry Macaron"

"Raspberry Macaron" is a case for Project Babble (face/mouth tracking project), housing a XIAO ESP32-S3 Sense with a OV2640 IR camera module. This case is meant to be easy to print and easy to assemble, while providing secure mounting, and a top facing USB-C port. No supports are necessary for any of the models. I have added a “mount base”, which can be used to make your own base for your specific headset, without needing to create the mounting interface itself. The case is specifically meant for the following Project Babble configuration: XIAO ESP32-S3 Sense OV2640 160° FOV IR Camera (850nm) 2x 850nm IR LEDs, 5mm 2x 82Ω Resistor for power for LEDs from the 3.3V pin It may work for a couple of other configurations as well, but it was not intended for them. You can find more information about the configurations here: https://docs.babble.diy/docs/hardware For the case you will need the following screws, and single nut: 4x M3 8-12mm (For the case corners) 2x M3 5mm (For the MCU holder) 4x