Thingiverse
Scroll Saw Insert
von machineree
45
Downloads
33
Likes
1
Makes
#Parametric Scroll Saw Table Insert
This was originally designed for a Delta 40-540 Scroll Saw, but could be adapted to others. The current specs fit the saw snugly and after a light sanding on the top with 220-grit, it helps provide a smooth cutting surface.
Two versions can be printed, one for little clearance around the blade and one for a full 45 degree tilt (make sure to adjust back 45 degrees in your printing software to print this flat). You may enter the thickness and width of your blade to accommodate different style and size blades.
Check comments in the OpenSCAD file for more information on editing the original.
This was originally designed for a Delta 40-540 Scroll Saw, but could be adapted to others. The current specs fit the saw snugly and after a light sanding on the top with 220-grit, it helps provide a smooth cutting surface.
Two versions can be printed, one for little clearance around the blade and one for a full 45 degree tilt (make sure to adjust back 45 degrees in your printing software to print this flat). You may enter the thickness and width of your blade to accommodate different style and size blades.
Check comments in the OpenSCAD file for more information on editing the original.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
