Thingiverse

Scroll Saw Insert

by machineree

45 Downloads

33 Likes

1 Makes

#Parametric Scroll Saw Table Insert

This was originally designed for a Delta 40-540 Scroll Saw, but could be adapted to others. The current specs fit the saw snugly and after a light sanding on the top with 220-grit, it helps provide a smooth cutting surface.

Two versions can be printed, one for little clearance around the blade and one for a full 45 degree tilt (make sure to adjust back 45 degrees in your printing software to print this flat). You may enter the thickness and width of your blade to accommodate different style and size blades.

Check comments in the OpenSCAD file for more information on editing the original.

40-540 delta insert openscad scroll Scroll Saw Throat plate throatplate 40-540 delta insert openscad scroll Scroll Saw Throat plate throatplate 40-540 delta insert openscad scroll Scroll Saw Throat plate throatplate

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Single piece

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format