simple hueforge

Print at 100% infill with a layer height of 0.12mm with a base layer of 0.2mm The Model is 114.46x160mm in size You may print at higher layer heights below the Min Depth of 0.44mm The Max Depth is 2.2mm and the Actual Depth is 2.4mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 4.2 This print uses 3 unique filaments Swap Instructions: Start with Charcoal At layer #7 (0.92mm) swap to Gray Border Only Colors from here until the end. At layer #13 (1.64mm) swap to Jade White for the rest.