Thingiverse
SkyMule engine mount
door FgDude
3
Downloads
5
Likes
0
Makes
This is a engine mount for the SkyMule so you can use a non bell type engine on it.
I have used the MTN 28-30 1200kv but you can use any BL engine in the 28-30 to 28-35 range. Swapping the engine out is easy.
I have made no holes for mounting the engine because the outcome of the wires of the BL engines are sometimes on different places and they must be coming out on the underside of the pod.
I have printed this in pla, use a thick bottom and top layer when using infill (25%).
ABS is better as some engines can get hot in flight.
I have used the MTN 28-30 1200kv but you can use any BL engine in the 28-30 to 28-35 range. Swapping the engine out is easy.
I have made no holes for mounting the engine because the outcome of the wires of the BL engines are sometimes on different places and they must be coming out on the underside of the pod.
I have printed this in pla, use a thick bottom and top layer when using infill (25%).
ABS is better as some engines can get hot in flight.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!