Thingiverse
Small Shelf
1
Downloads
6
Likes
0
Makes
I was in need of a small shelf by the entry for my car keys, so decided to give it a go. Here's what I came up with. Pretty simple, but gets the job done.
Overall dimensions are 200mm x 100mm x 90mm or approx. 8in wide x 4 in deep x 3.5in tall.
It is designed to use 2 medium sized Command picture hanging strips, velcro-style. Similar to this: https://a.co/d/07B24eQP
Settings for my print:
PLA
.20mm layer height
10% Infill
Supports - I chose to have them on, but you may be able to get away with them off.
Overall dimensions are 200mm x 100mm x 90mm or approx. 8in wide x 4 in deep x 3.5in tall.
It is designed to use 2 medium sized Command picture hanging strips, velcro-style. Similar to this: https://a.co/d/07B24eQP
Settings for my print:
PLA
.20mm layer height
10% Infill
Supports - I chose to have them on, but you may be able to get away with them off.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
