Thingiverse
Small Shelf
por we_print_4_fun
1
Descargas
6
Likes
0
Makes
I was in need of a small shelf by the entry for my car keys, so decided to give it a go. Here's what I came up with. Pretty simple, but gets the job done.
Overall dimensions are 200mm x 100mm x 90mm or approx. 8in wide x 4 in deep x 3.5in tall.
It is designed to use 2 medium sized Command picture hanging strips, velcro-style. Similar to this: https://a.co/d/07B24eQP
Settings for my print:
PLA
.20mm layer height
10% Infill
Supports - I chose to have them on, but you may be able to get away with them off.
Overall dimensions are 200mm x 100mm x 90mm or approx. 8in wide x 4 in deep x 3.5in tall.
It is designed to use 2 medium sized Command picture hanging strips, velcro-style. Similar to this: https://a.co/d/07B24eQP
Settings for my print:
PLA
.20mm layer height
10% Infill
Supports - I chose to have them on, but you may be able to get away with them off.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
