Snowflake Package

Project: Pacco_FioccoNeve.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x210.32mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 5 PLA+ Numakers Beige Brown Transmission Distance: 4 PLA+ Numakers Lemon Yellow Transmission Distance: 11 PLA+ Numakers Light Blue Transmission Distance: 4.8 PLA PolyLite White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #15 (1.28mm) swap to Beige Brown At layer #16 (1.36mm) swap to Lemon Yellow At layer #17 (1.44mm) swap to Light Blue At layer #21 (1.76mm) swap to White for the rest.