Solo Leveling Igris Hueforge

→ Link to my collection of works ← ****************************************************************************************** Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 166.67x250mm in size You may print at higher layer heights below the Base Thickness of 0.72mm The Max allowed Thickness is 2.48mm and the Actual Thickness is 2.16mm #ffffff PLA BambuLab Basic Jade White Transmission Distance: 4.4 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #0086d6 PLA BambuLab Basic Cyan Transmission Distance: 3.5 #080a0d PLA PolyLite Black Transmission Distance: 0.3 This print uses 5 unique filaments Swap Instructions: Start with Jade White At layer #10 (0.88mm) swap to Blue Gray At layer #16 (1.36mm) swap to Red At layer #21 (1.76mm) swap to Cyan At layer #25 (2.08mm) swap to Black for the rest. **************************************************************************************