Space marine Hueforge

→ Link to my collection of works ← Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 230x230mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.92mm #ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6 #ffffff PLA BabmyLab Basic Jade White Transmission Distance: 5.2 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #0086d6 PLA BambuLab Basic Cyan Transmission Distance: 3.5 #1c254c PLA BambuLab Matte Dark Blue Transmission Distance: 1 This print uses 7 unique filaments Swap Instructions: Start with Pumpkin Orange At layer #6 (0.56mm) swap to Yellow At layer #7 (0.64mm) swap to Jade White At layer #13 (1.12mm) swap to Blue Gray At layer #15 (1.28mm) swap to Black At layer #18 (1.52mm) swap to Jade White At