Thingiverse
Speed Tower
di arjanmels
18
Download
11
Likes
0
Makes
Customizable tower to test print speed and acceleration. Intended to test maximum speed and acceleration settings: the long perimeter stretches allow the printer to reach maximum speed. Watch the quality of the sharp corners.
You can print this with no-infill and no top fill. For proper build plate attachment, I suggest to keep the bottom fill.
In prusaslicer you can change a parameter every x layers by adding something like the following in the "After layer change G-code" field in the Printer Settings:
```{if layer_num%20==0}M900 K{layer_num/20*0.5}{endif}```
(This example changes the linear advance K factor every 20 layers in 0.5 increments.)
You can print this with no-infill and no top fill. For proper build plate attachment, I suggest to keep the bottom fill.
In prusaslicer you can change a parameter every x layers by adding something like the following in the "After layer change G-code" field in the Printer Settings:
```{if layer_num%20==0}M900 K{layer_num/20*0.5}{endif}```
(This example changes the linear advance K factor every 20 layers in 0.5 increments.)
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
![[WIP] Cura Software Linear Advance for TMC2208 extruder (Ender 3 v2)](/imgproxy.php?url=https%3A%2F%2Fcdn.thingiverse.com%2Fassets%2Fb7%2F1e%2F12%2F98%2Fbe%2Flarge_display_IMG_20200824_123833.jpg&w=400&h=300)
