Slicer Discord
Spice Rack – 3D-Druckmodell von MakerWorld MakerWorld
Organizers

Spice Rack

1 Downloads
1 Likes
0 Makes
Zum Modell
My wife wanted a means by which to organize all her spices in the pantry. We bought spice bottles in two different sizes, so there are two different sizes of storage rack. The criteria for the design follows:* Must be wall mounted.* To avoid the need to prevent the spice bottles from falling off the rack the bottles needed to lean toward the wall. She didn't want a ledge or other mechanical means of restraining the bottles.* The racks had to fit in a specific height and width.* Minimum number of holes in the wall for attachment.Design to address these constraints:* The racks tilts the bottles 15-degrees toward the wall.* The racks are secured to the wall by means of a cleat style connection. There two vertical hangers, each vertical hanger requires 3 toggle bolts for attachment to the drywall. The three screws are positioned one on the top, one at the bottom, and one connecting the two parts of the hanger.* To eliminate the need for horizontal supports the the individual racks are
Kategorie
Organizers
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen