Stitch Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.9mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 PLA BambuLab Basic Blue Transmission Distance: 4This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #9 (0.8mm) swap to Gray At layer #11 (0.96mm) swap to Jade White At layer #16 (1.36mm) swap to Ice Blue At layer #20 (1.68mm) swap to Blue for the rest.