Thingiverse

Test your 3D printer!

von ctrlV

17.1k Downloads

11.3k Likes

192 Makes

Zum Modell

check out the new version 2
http://www.thingiverse.com/thing:1019228

version 3
http://www.thingiverse.com/thing:1363023

more infos in our forum
http://www.whoote.com

This is a hard to print testfile!
often you don't know if your printer is ready for complex files. with this file you have an easy option to check problematic printing/slicing stuff.

does your printer challenge this ultimative part?
check it out and get (almost) instant results.

these test are included in this tiny file:

- size: the object is 4x50x50mm (baseplate)
- hole size: 3 holes (3/4/5mm)
- Nut size: M4 Nut should fit perfectly
- fine details: pyramide, cone, all numbers
- rounded print: wave, half sphere
- minimum distance between walls: 0.1/0.2/0.3/0.4/0.5mm
- overhang: 25°/30°/35°/40°/45°
- bridge print: 2/3/4/5/6/7/8/9mm
- surface: all the flat parts

there could be a lot of things go wrong, here the most common ones
- your printbed is not

Quelle

Thingiverse

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Einteilig Hardware nötig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 1/3

Drucker

FDM / FFF

Dateiformat