Thingiverse
Test your 3D printer!
por ctrlV
17.1k
Descargas
11.3k
Likes
192
Makes
check out the new version 2
http://www.thingiverse.com/thing:1019228
version 3
http://www.thingiverse.com/thing:1363023
more infos in our forum
http://www.whoote.com
This is a hard to print testfile!
often you don't know if your printer is ready for complex files. with this file you have an easy option to check problematic printing/slicing stuff.
does your printer challenge this ultimative part?
check it out and get (almost) instant results.
these test are included in this tiny file:
- size: the object is 4x50x50mm (baseplate)
- hole size: 3 holes (3/4/5mm)
- Nut size: M4 Nut should fit perfectly
- fine details: pyramide, cone, all numbers
- rounded print: wave, half sphere
- minimum distance between walls: 0.1/0.2/0.3/0.4/0.5mm
- overhang: 25°/30°/35°/40°/45°
- bridge print: 2/3/4/5/6/7/8/9mm
- surface: all the flat parts
there could be a lot of things go wrong, here the most common ones
- your printbed is not
http://www.thingiverse.com/thing:1019228
version 3
http://www.thingiverse.com/thing:1363023
more infos in our forum
http://www.whoote.com
This is a hard to print testfile!
often you don't know if your printer is ready for complex files. with this file you have an easy option to check problematic printing/slicing stuff.
does your printer challenge this ultimative part?
check it out and get (almost) instant results.
these test are included in this tiny file:
- size: the object is 4x50x50mm (baseplate)
- hole size: 3 holes (3/4/5mm)
- Nut size: M4 Nut should fit perfectly
- fine details: pyramide, cone, all numbers
- rounded print: wave, half sphere
- minimum distance between walls: 0.1/0.2/0.3/0.4/0.5mm
- overhang: 25°/30°/35°/40°/45°
- bridge print: 2/3/4/5/6/7/8/9mm
- surface: all the flat parts
there could be a lot of things go wrong, here the most common ones
- your printbed is not
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
