MakerWorld
Hueforge & Lithophane
Vai al Modello
Tifa Lockheart Bondage
59
Download
38
Likes
11
Makes
Project: Tifa Lockheart Bondage Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 234x161.73mm in size. You can scale the X, and Y axes to fit your needs. (Make sure you DO NOT scale the Z axis) You may print at higher layer heights below the Min Depth of 0.4mm The Max Depth is 2.4mm and the Actual Depth is 1.5mm Filaments Used: PLA Elegoo Black Transmission Distance: 0.1 PLA Elegoo Red Transmission Distance: 4.3 PLA Elegoo Yellow Transmission Distance: 4.7 PLA Elegoo White Transmission Distance: 3 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #12 (1.04mm) swap to Red At layer #14 (1.2mm) swap to Yellow At layer #15 (1.28mm) swap to White for the rest. Artwork by BlackBunnyArt Hueforge By CurtisKush420
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
