Slicer Discord
Universal blower – 3D-Druckmodell von Thingiverse Thingiverse
Universal blower – Bild 1 Universal blower – Bild 2 Universal blower – Bild 3 Universal blower – Bild 4 Universal blower – Bild 5 Universal blower – Bild 6
Tools

Universal blower

von MikleVV · Tools
175 Downloads
359 Likes
4 Makes
Zum Modell
I was absolutely tired of regularly buying gas cans to clean electrical circuits and I decided to make an air blower from a 12-volt motor from Aliexpress using a standard battery. I came across a 1500 mAh type B battery.

During operation, it turned out that this tool can not only clean electrical equipment, but also inflate boats, mattresses, fan coals for grilling, etc. To better perform these functions, he had to make various adapters for hoses and valves.

When operating at full speed, the battery lasts for 15-16 minutes of continuous operation. Whether this is a lot or a little can be understood by the fact that he inflates the boat (as in the photo) to 95% within 4.5 - 5 minutes. The remaining 5% must be filled with the boat pump, because The blower cannot create enough air pressure to fill the boat 100%.

The following additional components are required for assembly:
- Standard rechargeable lithium battery for power tools like this: https://aliexpress.com/item/1005006491283687.h
Kategorie
Tools
Quelle
Thingiverse
Veröffentlicht
Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz
Einteilig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 0/3
Drucker
FDM / FFF
Dateiformat
STL
Material
ABS
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen