Slicer Discord
Universal blower – 3D-printbaar model van Thingiverse Thingiverse
Universal blower – Bild 1 Universal blower – Bild 2 Universal blower – Bild 3 Universal blower – Bild 4 Universal blower – Bild 5 Universal blower – Bild 6
Tools

Universal blower

door MikleVV · Tools
175 Downloads
359 Likes
4 Makes
Model downloaden
I was absolutely tired of regularly buying gas cans to clean electrical circuits and I decided to make an air blower from a 12-volt motor from Aliexpress using a standard battery. I came across a 1500 mAh type B battery.

During operation, it turned out that this tool can not only clean electrical equipment, but also inflate boats, mattresses, fan coals for grilling, etc. To better perform these functions, he had to make various adapters for hoses and valves.

When operating at full speed, the battery lasts for 15-16 minutes of continuous operation. Whether this is a lot or a little can be understood by the fact that he inflates the boat (as in the photo) to 95% within 4.5 - 5 minutes. The remaining 5% must be filled with the boat pump, because The blower cannot create enough air pressure to fill the boat 100%.

The following additional components are required for assembly:
- Standard rechargeable lithium battery for power tools like this: https://aliexpress.com/item/1005006491283687.h
Categorie
Tools
Bron
Thingiverse
Gepubliceerd
Wat je nodig hebt om te printen: Beginner Lage betrouwbaarheid
Eendelig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 0/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
ABS
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie