Thingiverse

Universal Spool Stand

von odonnellp24

5 Downloads

6 Likes

0 Makes

I'd like to start off by saying this is not an original idea but rather an improvement on several designs that I saw. Mainly it was the lack of bearings in these designs that motivated me. I also preferred to orient the spool vertically and wanted to remove the excess weight from the top of my printer where it was previously mounted to minimize vibrations. This stand uses four 608 bearings, everything snap fits so no fasteners are required and is designed so that the legs overlap ensuring that even the thinnest spools will work. You can print the bearings (http://www.thingiverse.com/thing:4676) if you like, I've personally had good results with these in other projects and they would work very well in this application.

Quelle

Thingiverse

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Einteilig Hardware nötig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 1/3

Drucker

FDM / FFF

Dateiformat