USB Power Plug

USB power plug I created for powering my Raspberry Pi off my printer's power supply. This allows me to use a single outlet to power my printer, Pi and camera. The Power Plug mounts to 4040 rails using an M5x10 bolt and corresponding t-nut. I have it mounted to the left hand rail because that is where my BTT Pi TFT50 enclosure is so I have a short run from the enclosure to the plug. Make sure you buy a USB plug that can accept 24v (like the one I have linked below) as that is the common voltage most printers use. If not you'll need to use a buck converter to go from 24v to 12v.

Items needed:

* USB plug: https://amzn.to/3XgVpNQ
* 4x M2x6 bolts (socket/pan/etc. will work): https://amzn.to/479NANm
* 2x M5x10 flat head bolts: https://amzn.to/3AQ0kwf
* 2x M5 t-nuts: https://amzn.to/4e0evgA
* 2x fork terminal (optional depending on your power supply): https://amzn.to/3X563pF

Install:
1. Print both pieces
2. Align USB plug into the box and then add the clamp ring, use an Allen k