Wolverine Hueforge

This is a Hueforge multi-color print of Wolverine, designed to bring bold comic-book energy straight off the build plate. Layered with vivid contrasts of yellow, blue, red, orange, and black, this piece captures Wolverine’s iconic pose with claws crossed and ready. The sharp lines and stacked colors make it pop under light, giving it a striking dimensional effect that really shows off Hueforge’s potential for detailed multi-color prints. Project: Wolverine Multi-Color.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 174.5x235mm in sizeYou may print at higher layer heights below the Base Thickness of 0.96mmThe Max allowed Thickness is 3.2mm and the Actual Thickness is 3.2mmFilaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #0056b8 PLA BambuLab Basic Cobalt Blue Transmission Distance: 1.2 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5 #fce300 PLA B