Wolverine Hueforge

Project: Wolverine.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 240x240mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.1mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 5 unique filaments Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Brown At layer #13 (1.12mm) swap to Red At layer #15 (1.28mm) swap to Yellow At layer #18 (1.52mm) swap to Jade White for the rest. Comment imprimer plus de 4 couleurs avec un seul AMS : à partir de 42 sec sur la vidéo How to print more than 4 colours with a single AMS : from 42 sec onwards in the video