Thingiverse
Heat Set Insert Press
von matthijsbos
67
Downloads
55
Likes
0
Makes
Inspired by [adafruit](https://learn.adafruit.com/heat-set-rig) I made a variant from some scrap materials I had laying around.
The rods are 12x250mm and compression fit into the base. LM12UU bearings are used in the holder and also compression fit using a bench vise. A switchable magnetic base allows to secure it to a steel surface.
The opening for the soldering iron is slightly tapered to follow for an even grip on the rubber handle.
Onshape document: https://cad.onshape.com/documents/af2593371738066ba7016097/w/87c5dd694d87faea205ee111/e/eb83ddff6530cceb1b795acc?renderMode=0&uiState=61db0ae65a116b03f606dd23
The rods are 12x250mm and compression fit into the base. LM12UU bearings are used in the holder and also compression fit using a bench vise. A switchable magnetic base allows to secure it to a steel surface.
The opening for the soldering iron is slightly tapered to follow for an even grip on the rubber handle.
Onshape document: https://cad.onshape.com/documents/af2593371738066ba7016097/w/87c5dd694d87faea205ee111/e/eb83ddff6530cceb1b795acc?renderMode=0&uiState=61db0ae65a116b03f606dd23
matthijsbos veröffentlicht auch auf
69 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
