Thingiverse
Hinge
24
Descargas
20
Likes
0
Makes
Originally designed for an ultimaker 2 enclosure I was building.
The hole spacing is 25mm by 30mm
Requires:
1 x 35mm bolt
1/2 x m3 washer (for the removable and fixed design respectively)
There are two versions, one that can be slid apart easily and one that is fixed. Both use a m3 washer (1mm thick) to act as a small bushing.
Best printed with supports - touching build plate
The hole spacing is 25mm by 30mm
Requires:
1 x 35mm bolt
1/2 x m3 washer (for the removable and fixed design respectively)
There are two versions, one that can be slid apart easily and one that is fixed. Both use a m3 washer (1mm thick) to act as a small bushing.
Best printed with supports - touching build plate
TinkerLifeProjects también publica en
9 modelos adicionales en 1 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
