hueforge trunks

Project: trunks.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 170x170mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3mm and the Actual Depth is 2.9mmFilaments Used: PLA 3dhojor matte black Transmission Distance: 0.6 PLA sunlu matte blue Transmission Distance: 1.5 PLA sunlu gray Transmission Distance: 1 PLA sunlu matte orange Transmission Distance: 3.9 PLA polyterra matte red Transmission Distance: 2.3 PLA 3dhojor magenta Transmission Distance: 3.5 PLA sunlu matte white Transmission Distance: 4.7 PLA duramic 3d matte purple Transmission Distance: 1.1 PLA esun matter marine blue Transmission Distance: 1.1This print uses 9 unique filamentsSwap Instructions: Start with matte black At layer #7 (0.64mm) swap to matte blue At layer #8 (0.72mm) swap to gray At layer #10 (0.88mm) swap to matte orange At layer #15 (1.28mm) swap to matte red At layer #18 (1.52mm) swap to magenta At layer #20 (1.68mm) sw