Thingiverse
message light
von chriswal
7
Downloads
8
Likes
0
Makes
This is a networked message light for office tables
What you need:
Raspberry 3b + Power Supply
a micro sdcard
pimoroni speakerphat (no longer available)
a possible replacement: Adafruit I2S 3W Stereo Speaker Bonnet
NeoPixel Jewel - 7 x 5050 RGB LED
Some double sided tape and a soldering iron
old Osram Led Lamps for harvesting the dome / or you print your own
on the Picture you can see a printed one (with an SLA Printer) and one from an Led Lamp
It is possible to solder all together and then assemble the whole thing. The led fits through the hole in the tower, and also through the slot in the led holder.
added photon file from my successful SLA print.
What you need:
Raspberry 3b + Power Supply
a micro sdcard
pimoroni speakerphat (no longer available)
a possible replacement: Adafruit I2S 3W Stereo Speaker Bonnet
NeoPixel Jewel - 7 x 5050 RGB LED
Some double sided tape and a soldering iron
old Osram Led Lamps for harvesting the dome / or you print your own
on the Picture you can see a printed one (with an SLA Printer) and one from an Led Lamp
It is possible to solder all together and then assemble the whole thing. The led fits through the hole in the tower, and also through the slot in the led holder.
added photon file from my successful SLA print.
chriswal veröffentlicht auch auf
33 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
