Thingiverse
message light
por chriswal
7
Descargas
8
Likes
0
Makes
This is a networked message light for office tables
What you need:
Raspberry 3b + Power Supply
a micro sdcard
pimoroni speakerphat (no longer available)
a possible replacement: Adafruit I2S 3W Stereo Speaker Bonnet
NeoPixel Jewel - 7 x 5050 RGB LED
Some double sided tape and a soldering iron
old Osram Led Lamps for harvesting the dome / or you print your own
on the Picture you can see a printed one (with an SLA Printer) and one from an Led Lamp
It is possible to solder all together and then assemble the whole thing. The led fits through the hole in the tower, and also through the slot in the led holder.
added photon file from my successful SLA print.
What you need:
Raspberry 3b + Power Supply
a micro sdcard
pimoroni speakerphat (no longer available)
a possible replacement: Adafruit I2S 3W Stereo Speaker Bonnet
NeoPixel Jewel - 7 x 5050 RGB LED
Some double sided tape and a soldering iron
old Osram Led Lamps for harvesting the dome / or you print your own
on the Picture you can see a printed one (with an SLA Printer) and one from an Led Lamp
It is possible to solder all together and then assemble the whole thing. The led fits through the hole in the tower, and also through the slot in the led holder.
added photon file from my successful SLA print.
chriswal también publica en
33 modelos adicionales en 1 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
