Thingiverse
message light
door chriswal
7
Downloads
8
Likes
0
Makes
This is a networked message light for office tables
What you need:
Raspberry 3b + Power Supply
a micro sdcard
pimoroni speakerphat (no longer available)
a possible replacement: Adafruit I2S 3W Stereo Speaker Bonnet
NeoPixel Jewel - 7 x 5050 RGB LED
Some double sided tape and a soldering iron
old Osram Led Lamps for harvesting the dome / or you print your own
on the Picture you can see a printed one (with an SLA Printer) and one from an Led Lamp
It is possible to solder all together and then assemble the whole thing. The led fits through the hole in the tower, and also through the slot in the led holder.
added photon file from my successful SLA print.
What you need:
Raspberry 3b + Power Supply
a micro sdcard
pimoroni speakerphat (no longer available)
a possible replacement: Adafruit I2S 3W Stereo Speaker Bonnet
NeoPixel Jewel - 7 x 5050 RGB LED
Some double sided tape and a soldering iron
old Osram Led Lamps for harvesting the dome / or you print your own
on the Picture you can see a printed one (with an SLA Printer) and one from an Led Lamp
It is possible to solder all together and then assemble the whole thing. The led fits through the hole in the tower, and also through the slot in the led holder.
added photon file from my successful SLA print.
chriswal publiceert ook op
33 extra modellen op 1 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
