Thingiverse
Mini Light
von Warialinth
1
Downloads
5
Likes
0
Makes
Little lamp housing i've made for my neopixel compatible lamp boards (10x WS2812B)
These can be wall mounted or glued to surfaces.
Can be filled with lacker or epoxy to make it waterproof.
These can be printed from PLA as they hardly reach 40°C when lit on full power.
It is good to glue the lig so it won't fall off.
To get the lamp boards ..you might need to solder them yourself , not that hard after all.
For BOM and PCB order look at the project. https://easyeda.com/Warialinth/ws2812b-lamp
These can be wall mounted or glued to surfaces.
Can be filled with lacker or epoxy to make it waterproof.
These can be printed from PLA as they hardly reach 40°C when lit on full power.
It is good to glue the lig so it won't fall off.
To get the lamp boards ..you might need to solder them yourself , not that hard after all.
For BOM and PCB order look at the project. https://easyeda.com/Warialinth/ws2812b-lamp
Warialinth veröffentlicht auch auf
12 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!