Thingiverse
Mini Light
by Warialinth
1
Downloads
5
Likes
0
Makes
Little lamp housing i've made for my neopixel compatible lamp boards (10x WS2812B)
These can be wall mounted or glued to surfaces.
Can be filled with lacker or epoxy to make it waterproof.
These can be printed from PLA as they hardly reach 40°C when lit on full power.
It is good to glue the lig so it won't fall off.
To get the lamp boards ..you might need to solder them yourself , not that hard after all.
For BOM and PCB order look at the project. https://easyeda.com/Warialinth/ws2812b-lamp
These can be wall mounted or glued to surfaces.
Can be filled with lacker or epoxy to make it waterproof.
These can be printed from PLA as they hardly reach 40°C when lit on full power.
It is good to glue the lig so it won't fall off.
To get the lamp boards ..you might need to solder them yourself , not that hard after all.
For BOM and PCB order look at the project. https://easyeda.com/Warialinth/ws2812b-lamp
Warialinth also publishes on
12 additional models across 1 more platforms
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!