Thingiverse
Mini Light
door Warialinth
1
Downloads
5
Likes
0
Makes
Little lamp housing i've made for my neopixel compatible lamp boards (10x WS2812B)
These can be wall mounted or glued to surfaces.
Can be filled with lacker or epoxy to make it waterproof.
These can be printed from PLA as they hardly reach 40°C when lit on full power.
It is good to glue the lig so it won't fall off.
To get the lamp boards ..you might need to solder them yourself , not that hard after all.
For BOM and PCB order look at the project. https://easyeda.com/Warialinth/ws2812b-lamp
These can be wall mounted or glued to surfaces.
Can be filled with lacker or epoxy to make it waterproof.
These can be printed from PLA as they hardly reach 40°C when lit on full power.
It is good to glue the lig so it won't fall off.
To get the lamp boards ..you might need to solder them yourself , not that hard after all.
For BOM and PCB order look at the project. https://easyeda.com/Warialinth/ws2812b-lamp
Warialinth publiceert ook op
12 extra modellen op 1 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!