Moblite7 Frame + Upgrades

i crashed my frame and i also wanted to upgarde my Moblite7.
so i designed a new one

there are two frames, one with 0,8mm width and 1,2mm
and two propguards! The light one is empty inside but stabilized! It weights less but does the job.

FOR THE UPGRADES:

Camera = i'm using a Caddx Ant with a canopy from: https://www.thingiverse.com/thing:4692440

TBS CRSF = u just need to solder it to your UART1 and change the settings on BetaFlight

Antenna = I'm using a SIGMA 5.8GHz RHCP MMCX Antenna.
NOTE = PLEASE solder 2 different cables, one to your BAT-Ground (minus) and an extra wire where the standart antenna was soldered!
cut the antenna to the length u need and solder it to the minus and video signal with the two extra wires!

If u don't know how to solder the Antenna here is a guide:
https://www.youtube.com/watch?v=LkyIcy_XLYE&ab_channel=DrainManFPV