Thingiverse
Support Spindle
par stjaimy
5
Téléchargements
14
Likes
0
Makes
The base for making your own Support spindle. All you need to add is a 10mm diameter dowl (or in my case a paintbrush)
I recommend using a 50% or higher infill. I used 50% which worked fine, but I would like it to be a little heavier so a higher percentage is recommended.
I recommend using a 50% or higher infill. I used 50% which worked fine, but I would like it to be a little heavier so a higher percentage is recommended.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
