Thingiverse
Support Spindle
door stjaimy
5
Downloads
14
Likes
0
Makes
The base for making your own Support spindle. All you need to add is a 10mm diameter dowl (or in my case a paintbrush)
I recommend using a 50% or higher infill. I used 50% which worked fine, but I would like it to be a little heavier so a higher percentage is recommended.
I recommend using a 50% or higher infill. I used 50% which worked fine, but I would like it to be a little heavier so a higher percentage is recommended.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
