The Devil Quartararo Hueforge

El Diablo Quartararo Hueforge Boost MeThanks for your support ;) Project: El_Diablo20.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA+ Sunlu Blue Transmission Distance: 3.1 PLA R3D Red Transmission Distance: 3.8 PLA PolyLite White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue At layer #13 (1.12mm) swap to Red At layer #17 (1.44mm) swap to White for the rest. Please leave a comment and like if you like my Hueforge. Thank you very much.