Thingiverse
Monkey Pod Camera Stand Link
by Mr_Dabrudda
34
Downloads
19
Likes
0
Makes
A redesign of the JOBY GorillaPOD flexi camera stand.
0.2 Layer
50% Infill
0.8 Wall Thickness
45-55mm/s print speed
Support Placement: Touching Buildplate
Support Pattern: Lines
Support Density: 10% Support Density
Build Plate Adhesion:
Brim @ 3mm
Ran the STL thru Netfabb to check for any errors.
0.2 Layer
50% Infill
0.8 Wall Thickness
45-55mm/s print speed
Support Placement: Touching Buildplate
Support Pattern: Lines
Support Density: 10% Support Density
Build Plate Adhesion:
Brim @ 3mm
Ran the STL thru Netfabb to check for any errors.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!