Thingiverse
Monkey Pod Camera Stand Link
por Mr_Dabrudda
34
Descargas
19
Likes
0
Makes
A redesign of the JOBY GorillaPOD flexi camera stand.
0.2 Layer
50% Infill
0.8 Wall Thickness
45-55mm/s print speed
Support Placement: Touching Buildplate
Support Pattern: Lines
Support Density: 10% Support Density
Build Plate Adhesion:
Brim @ 3mm
Ran the STL thru Netfabb to check for any errors.
0.2 Layer
50% Infill
0.8 Wall Thickness
45-55mm/s print speed
Support Placement: Touching Buildplate
Support Pattern: Lines
Support Density: 10% Support Density
Build Plate Adhesion:
Brim @ 3mm
Ran the STL thru Netfabb to check for any errors.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!