Thingiverse
Monkey Pod Camera Stand Link
par Mr_Dabrudda
34
Téléchargements
19
Likes
0
Makes
A redesign of the JOBY GorillaPOD flexi camera stand.
0.2 Layer
50% Infill
0.8 Wall Thickness
45-55mm/s print speed
Support Placement: Touching Buildplate
Support Pattern: Lines
Support Density: 10% Support Density
Build Plate Adhesion:
Brim @ 3mm
Ran the STL thru Netfabb to check for any errors.
0.2 Layer
50% Infill
0.8 Wall Thickness
45-55mm/s print speed
Support Placement: Touching Buildplate
Support Pattern: Lines
Support Density: 10% Support Density
Build Plate Adhesion:
Brim @ 3mm
Ran the STL thru Netfabb to check for any errors.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !