Thingiverse
Thread holder (updated)
par Danimal91
7
Téléchargements
4
Likes
0
Makes
The print pictured was printed in PLA
No supports are needed, print with the front, facing down on the build plate.
Use double-sided tape to attach it to the table
To create the screw holder on the back I super glued and m3 screw in from underneath and threaded on a bolt. I used a bolt handle found here:
https://www.thingiverse.com/thing:5532943
to make removal easier.
No supports are needed, print with the front, facing down on the build plate.
Use double-sided tape to attach it to the table
To create the screw holder on the back I super glued and m3 screw in from underneath and threaded on a bolt. I used a bolt handle found here:
https://www.thingiverse.com/thing:5532943
to make removal easier.
Danimal91 publie également sur
15 modèles supplémentaires sur 2 autres plateformes
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
