Thingiverse
Thread holder (updated)
por Danimal91
7
Descargas
4
Likes
0
Makes
The print pictured was printed in PLA
No supports are needed, print with the front, facing down on the build plate.
Use double-sided tape to attach it to the table
To create the screw holder on the back I super glued and m3 screw in from underneath and threaded on a bolt. I used a bolt handle found here:
https://www.thingiverse.com/thing:5532943
to make removal easier.
No supports are needed, print with the front, facing down on the build plate.
Use double-sided tape to attach it to the table
To create the screw holder on the back I super glued and m3 screw in from underneath and threaded on a bolt. I used a bolt handle found here:
https://www.thingiverse.com/thing:5532943
to make removal easier.
Danimal91 también publica en
15 modelos adicionales en 2 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
