Thingiverse

Wide leaf rake

by Snabel_a

4 Downloads

10 Likes

0 Makes

This is a 60cm wide rake for a 28mm wooden handle.

Printed and tested and it works very well.

Print the pins in PETG for flexibility. The rake body can be PLA. No support is needed. Push a piece of steel wire through the hole in the body and pins to hold the pins in place. 33 pins are required.

If you have a small printer the body will have to be split into pieces and glued.

gardening

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA, PETG, Wood PLA

Min. bed size

50 mm (Small)

Software

Cura, PrusaSlicer, or similar

Same designer, more platforms

Snabel_a also publishes on

1 additional models across 1 more platforms

Printables

1 model

♥ 10 ↓ 29

Frequently Asked Questions

Which 3D printer is suitable for Wide leaf rake?

Any FDM printer should handle Wide leaf rake just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

Does Wide leaf rake need supports when printing?

No supports needed for Wide leaf rake — it's designed to print clean off the bed.

What file format is Wide leaf rake available in?

Wide leaf rake is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Wide leaf rake free to download?

Yes, Wide leaf rake is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Wide leaf rake

Similar Models

Add to Collection